CW Junction Listing Parameters

Parameter

Short Description

Long Description

 

CW Junc­tion Class

System or Custom.

Junctions from the “System” class use the settings at the Curtain Wall System Settings level.

Junctions from the “Custom” class have been individually customized using Junction Settings, accessible through Curtain Wall Edit Mode.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/060_elementparameters/CurtainWallJunction_JunctionClass.png 

CW Junc­tion Type

Name of the Junction Type

Defined at Junction Type in Curtain Wall Settings - Junctions page.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/060_elementparameters/CurtainWallJunction_JunctionType.png 

  • Was this Helpful ?
  • YesNo
Relevant topics
Curtain Wall Junction Listing Parameters
Parameter Short Description Long Description   Junction Class System or Custom. Junctions from the "System" class use the settings at the Curtain Wall System Set­tings level. Junctions from the "Custom" class ...
Insert MEP Junction Elements
Junction-type MEP tools are the Tee, Wye and Take-off.   Generally, you will add junction-type MEP elements to an already placed, straight MEP element. Note: Make sure the Autogroup function (Edit > Grouping > Autogroup) is turned off. Junctions cannot be placed ...
Start Routing by Placing Junction on a Placed MEP Element
You can begin a Routing operation by placing a junction at an already placed straight MEP segment. •Click Start Routing on the MEP Routing palette •Click on the centerline of a placed MEP element The Routing will begin at the place you clicked, by inserting a Junction. The ...