Ramp Object

The ARCHICAD Library includes parametric Ramp objects (Straight and Curved.)

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/RampObject.png 

Use these to create standard Ramps displayed in the format you need.

As needed, define separate Transition segments at the top and bottom of the Ramp.

Straight Ramp

Slope

Use the Ramp Settings panel (Dimensions page) to define the slope of the Ramp.

Enter the slope using either Gradient, Percentage, or Degree

Alternatively, check Define Slope By Dimensions: then enter Height and Dimension values in the fields below, to automatically calculate the slope.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/RampSettingsSlope.png 

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/RampSlopeDimensions.png 

Define Slope Directly

Define Slope by entering Ramp Length/Height

Text

Use the Text page of Ramp Settings to optionally display one or two lines of text on the 2D Ramp, in the format you choose. For a slope displayed e.g. as 1:X, you can use any character or text as the separator.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/RampText.png 

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/RampGradientPlain.png 

Slope displayed as Gradient

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/RampDegree.png 

Slope displayed in Degrees

Transitions

On the Ramp Settings panel (Dimensions 1 and 2 pages):

Check Ramp Transitions to create and define transitional segments at the top and bottom of the Ramp.

For each segment, define its slope (either directly or by Dimensions). (Click the chain icon to use equal values for both top and bottom transition.)

Additional dimension fields are available on the Dimensions 2 page: enter or calculate length and height values for each transition segment.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/RampTransitions_Dialog.png   https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/RampTransitions_Dialog2.png

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/RampGradient.png 

Note: Straight Ramps can be stretched graphically, using the Move Node or the Stretch command of the pet palette. When you stretch, the middle segment is modified (not the transitions).

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/StretchRamp.png 

Curved Ramp

For the Curved Ramp object, additional dimension values are available.

Adjust Ramp width and two radius values (inner and outer)

The full Ramp length is indicated

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/CurvedRamp1.png 

Check Ramp Transitions to create and define transitional segments at the top and bottom of the Ramp

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/CurvedRampTransitions.png 

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/CurvedRamp3D.png 

  • Was this Helpful ?
  • YesNo
Relevant topics
Improved Ramp object
The Ramp object can now display slope gradient data in multiple forms.   Different slopes can be defined for Ramp Transitions at the bottom and top.