Show an Element in a Single Renovation Filter Only

During the course of your Renovation project, you may wish certain specific elements to be visible only if a particular Renovation Filter is in effect.

To achieve this, you must define the selected element(s) as specific to the current Renovation Filter. The filter-specific element(s) will be shown only in that single Renovation Filter, and will not exist in any other Renovation Filter.

Note: Of course, the filter-specific element will be shown in that Renovation Filter only if its Renovation Status would ordinarily be shown in that Renovation Filter.

You can define a selected element as “filter-specific” either on the Renovation Palette, or in its Selection Settings (Classification and Properties Panel).

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/050_viewsvb/ShowOnRenovationIcon.png     https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/050_viewsvb/ShowOnRenovationTags.png

  • Was this Helpful ?
  • YesNo
Relevant topics
Renovation Filter Options
Use this dialog box (Document > Renovation > Renovation Filter Options) to define which elements (by Renovation Status) should be ...
Apply Renovation Filter
To apply a different Renovation Filter to the current tab/window, do one of the following: Use Quick Options •Use the Renovation Filter ...