Import Issues (BCF format)

1.Go to Issue Organizer.

2.From the Additional Settings pop-up button:

Import

Import from BIMcloud

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/080-2_issuehandling/ImportBCFCommand.png 

3.Browse for a file in BCF format. (All BCF formats are supported.)

4.Click Open.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/080-2_issuehandling/IssueImport2.png 

Note: When importing a BCF file, you don’t need to also re-import the IFC file that you created out of your ARCHICAD model. The elements in the BCF file will identify the ARCHICAD elements in their native environment, because the ARCHICAD elements already include a corresponding IFC GUID.

5.The Locate IFC Files dialog box appears.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/080-2_issuehandling/LocateIFCFiles.png 

Here, you can optionally browse for and locate the IFC files referenced in the BCF entry. The IFC file names are listed: select one and then click Locate to browse for the file location. (IFC files are identified based on their GUID, not their name.)

Note: Locating the referenced IFC files is optional. Click Continue to skip this step. However, you may wish to locate the referenced file if, for example, composite elements were exploded at IFC export and thus were assigned different GUIDs: locating the original file here will allow the BCF file to identify the original elements.

6.Click Continue.

7.The imported Issues are added to Issue Organizer. Each is shown in bold type, until you open it.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/080-2_issuehandling/ImportBCFBold.png 

  • Was this Helpful ?
  • YesNo
Relevant topics
Export Issues (BCF format)
1.Go to Issue Organizer. 2.Select one or more Issues. 3.From the Additional Settings pop-up button: –Export –Export to BIMcloud   4.Save the file in BCF format. (All BCF versions are supported; choose a BCF version from the Save as type drop-down list.) 5.Click ...
Import Issues from Solibri
Issues created in Solibri can be imported to ARCHICAD’s Issue Organizer, where you can handle them as needed. You can import all issues, or limit the import to issues that are either selected or marked in Solibri.   Click one of the following commands from the pop-up: ...