Parameter |
Short Description |
Long Description |
|
Column Core Dimension 1 |
For a rectangular or profiled Column: One of the dimensions of the Column in cross-section. (The other dimension is “Core Dimension 2”.) Does not include veneer. (To include veneer, use the Width field.) |
For a circular Column: the diameter of the Column. |
|
Column Core Dimension 2 |
For a rectangular or profiled Column: One of the two dimensions of the Column in cross-section. (The other dimension is “Core Dimension 1.”) Does not include Veneer. |
For a circular Column: the diameter of the Column. |
|
Column Cross Section Type |
Rectangular, Circular or Profiled |
Defined in Column Settings |
|
Column Side Surface |
Surface assigned to Column |
Defined in Column Settings |
|
Veneer Building Material |
Name of Building Material assigned to Veneer |
Defined in Column Settings |
|
Veneer Surface area |
Net Surface area of the Column Veneer on all sides |
Surfaces of the Veneer top/bottom are ignored. Reduced by Solid Element Operations. |
|
Veneer Type |
Core, Finish or None |
Defined in Column Settings This setting affects the display of the Column, depending on Partial Structure Display Settings. |
|
Gross Surface Area of the Core (without top/bottom) |
Gross Surface Area of the Column Core on all sides. |
Surfaces of the Column top/bottom are ignored. Solid Element Operations are ignored. |
|
Gross Surface Area of the Core top (or bottom) |
Surface area of the cross-section of the Core at the top (or bottom) of the Column. |
Does not take any Solid Element Operations into account. |
|
Gross Surface Area of the Veneer (without top/bottom) |
Gross Surface Area of the Column Veneer on all sides |
Surfaces of the Veneer top/bottom are ignored. Solid Element Operations are ignored. |
|
Gross Surface Area of the Veneer top (or bottom) |
Surface area of the cross section of the Veneer at the top (or bottom) of the Column. |
Does not take any Solid Element Operations into account. |
|
Bounding Perimeter of Column Profile |
Perimeter of the Column’s cross section' s bounding box. |
|
|
Area of the Column |
Area of the Column’s cross section on the Floor Plan, including the area of the Veneer, if any. |
|
|
Gross Volume of the Core |
Gross Volume of the Column Core. |
Solid Element Operations are ignored. |
|
Gross Volume of the Veneer |
Gross Volume of the Column Veneer. |
Solid Element Operations are ignored. |
|
Maximum Height of the Column |
For a Column cut e.g. by a slanted Roof: the highest point of the Column. |
|
|
Minimum Height of the Column |
For a Column cut e.g. by a slanted Roof: the lowest point of the Column. |
For a straight or slanted Column: equivalent to Height (General field). |
|
Net Surface Area of the Core (without top/bottom) |
Net Surface area of the Column Core on all sides (but not the top or bottom) |
Surfaces of the Column top/bottom are ignored. Reduced by Solid Element Operations. |
|
Net Surface Area of the Core bottom |
Surface area of the cross-section of the Core at the bottom of the Column. |
Reduced by Solid Element Operations. |
|
Net Surface Area of the Core top |
Surface area of the cross-section of the Veneer at the top of the Column. |
Reduced by Solid Element Operations. |
|
Net Surface Area of the Veneer bottom |
Surface area of the cross-section of the Veneer at the bottom of the Column. |
Reduced by Solid Element Operations. |
|
Net Surface Area of the Veneer top |
Surface area of the cross-section of the Veneer at the top of the Column. |
Reduced by Solid Element Operations. |
|
Net Volume of the Column Core |
Net Volume of the Column Core. |
Reduced by Solid Element Operations. |
|
Net Volume of the Veneer |
Net Volume of the Column Veneer on all sides. |
Reduced by Solid Element Operations. |
|