Restructure Schedule to Fit Layout

Note: This function is also available for Project Indexes placed on Layouts.

Use the Restructure Table command to automatically split up large Drawings (e.g. based on Schedules) which exceed the Layout size, and to lay out the parts next to each other.

The following image shows a Window Schedule that does not fit onto an A4 sized sheet.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/050_viewsvb/ScheduleRestructure_1.png 

Follow these steps:

1.Make sure that the Schedule (on which the Drawing is based) is using the “Records by Columns” format (see Display by Rows or Columns.)

2.Make sure that the Drawing uses the “Fit Frame to Drawing” option (see Drawing Frame).

3.On the Layout: select the Drawing.

4.From the Pet Palette, choose the Restructure Table command, then manually resize the Drawing frame.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/050_viewsvb/RestructureIcon.png 

The result: the Schedule is split in two portions which are placed under each other.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/050_viewsvb/ScheduleRestructure_2.png 

Note: If the selected Drawing is set to Split Drawing into Multiple Layouts, then the Restructure Table command will place part of the Schedule onto an additional Layout.

See Split Schedule into Multiple Layouts.

  • Was this Helpful ?
  • YesNo
Relevant topics
Fit in Window
Choose the View > Fit in Window command or click the corresponding option from the Quick Options bar at the bottom of the active window. ...