Model Rebuild Options

This dialog box (Options > Work Environment > Model Rebuild Options) provides controls that affect Background Updating, rebuilding the 3D and Section/Elevation/IE windows, creating reports, and dealing with error alerts.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/140_userinterfacedialogboxes/ImagingWE.png 

Background Updating

Enabled: This control (on by default) enables ARCHICAD to take advantage of the processor’s unused capacity to build up different model views in advance. Background processing also utilizes your hardware more efficiently. Because Background Updating keeps open model windows (or tabs) up to date, it enables you to switch among different views faster.

Enabled when device is plugged in: Power save mode, recommended for mobile devices. Automatically suspends background updating when the device is not connected to an external power source. Background processing will be enabled again once you plug the device in.

Disabled: No background updating will take place.

Feedback in Status Bar

The status bar of your ARCHICAD window provides feedback on background processing (e.g. “Background Updating enabled”). By clicking on the status bar icon, you can access the three above settings and change them.

STATUS ICONS FOR BACKGROUND UPDATING

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/140_userinterfacedialogboxes/Ikon_Enabled.png 

ENABLED

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/140_userinterfacedialogboxes/Ikon_Battery.png 

ENABLED IN POWER SAVE MODE

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/140_userinterfacedialogboxes/Ikon_Disabled.png 

DISABLED

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/140_userinterfacedialogboxes/Ikon_Updating.png 

UPDATE IN PROGRESS

Auto-Rebuild Model View Control

Update Auto-rebuild Model viewpoints continuously

If this box is checked, ARCHICAD will continuously rebuild Sections/Elevations/Interior Elevations of Auto-rebuild Model type to reflect your edits while you work in the viewpoint.

However, in large projects this may cause slowdowns. In this case, try unchecking this box: as a result, Auto-rebuild viewpoints will be rebuilt only when you re-open the window or use the Rebuild command from the context menu.

3D Window Rebuild Controls

Auto-rebuild 3D Window when activated: Checking this box means the 3D display of your plan is updated after each modification to the model, as soon as you activate the 3D Window.
If this box is unchecked, the 3D model does not show the modifications until you choose the View > Refresh > Rebuild command. Switching this option off can be useful if you want to keep an already existing 3D image in the window for a longer period, and you want to avoid accidentally rebuilding it.

Note: If you edit elements in an outdated 3D view, deleted elements will be visible but cannot be selected. Moved elements can be selected, but their selection dots are displayed at the real location and you cannot edit them. Modified elements can be selected and edited, but this will trigger the rebuilding of the view.

3D Settings changes bring 3D Window to front: Check this box if you want to activate the 3D window and rebuild its content every time you make a change in either 3D Projection Settings or 3D Styles.

Keep zoomed detail on Rebuild: Check this box to preserve the last zoom made in the 3D Window even if you choose View > Refresh > Rebuild. If you uncheck it, the 3D Window will recreate the 3D view at the original zoom level.

Section Window Rebuild Control

Keep zoomed detail on Rebuild from Model: If you mark this checkbox, then the zoom level of your Section/Elevation/IE Window will be retained even after you execute a Rebuild command.

For more information, see Updating Sections.

3D and Calculation Process Check Controls

Show Progress Window: If this box is checked, the progress of 3D and list processing is indicated by a special timer. This will help you evaluate whether to cancel lengthy 3D redraws or calculations, change some settings (for example by selecting a smaller area, setting more specific filters or less precise imaging options or reducing the 3D Window’s size).

Note: The movement of the indicator is proportional not with the elapsed time, but with the amount of data processed.

Interrupt with Error Messages: If this box is checked, any error messages will appear on the screen (in the Session Report Window) before the imaging or calculation process is completed. If the box is left unchecked, error reports appear only after the process is completed.

Write Report: Use this checkbox to enable or disable the creation of a report on the 3D conversion and list calculation processes. Use the sliding switch to set the amount of detail it should contain.

See also Session Report Window.

Selected Elements to be Calculated: This pop-up field gives you three options for handling a possible conflict between a listing command and items selected in the workspace.

Select List All to calculate all selected elements in the list, even though they do not correspond to the filtering criteria.

Select Use Filters to apply the filters defined for the list scheme to the selected elements. Elements that do not correspond to these filters will be ignored.

Selecting Show Alert will display a warning about the situation and you will be able to choose between the two options above.

For more information, see Calculation (Legacy).

  • Was this Helpful ?
  • YesNo
Relevant topics
Rebuild Trace Reference
Use the Rebuild command (available from the Trace & Reference Palette or among the Trace Reference commands) to rebuild the Reference to ...
Summary of Rebuild Commands
The View > Refresh > Rebuild command is available in all construction windows. It rebuilds the model in the currently active ...
Faster Rebuild of Views
ARCHICAD is continuously improving multi-core handling during long operations. ARCHICAD 23 introduces multi-threading during the initial view rebuild of simple elements, such as lines, arcs, polylines, and splines. This is extremely useful for large dxf/dwg drawings received from other ...