Slab Listing Parameters

Parameter

Short Description

Long Description

 

Elevation Bottom

Elevation of the Bot­tom of the Slab

 

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/060_elementparameters/Slab_ElevationBottom.png 

Elevation Top

Elevation of the Top of the Slab

 

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/060_elementparameters/Slab_ElevationTop.png 

Surface Area of the Slab Bottom (Gross)

Area of the Surface of the Bottom of the Slab, including the Surface of any holes.

Reduced by trims. SEO's are ignored

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/060_elementparameters/SlabGrossBottomholes.png 

Surface Area of the Slab Bottom (Gross, with holes)

Area of the Surface of the Bottom of the Slab, subtracting the Surface of any holes.

Reduced by trims. SEO's are ignored

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/060_elementparameters/Slab_GrossBottomSurface.png 

Surface Area of the Slab Edges (Gross)

Area of the Surface of all the Slab edges. Hole edges are ignored.

Reduced by trims. SEO's are ignored

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/060_elementparameters/Slab_GrossSurface.png 

Surface Area of the Slab Edges (Gross, with holes)

Area of the Surface of all the Slab edges, including the edges of any holes.

Reduced by trims. SEO's are ignored

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/060_elementparameters/Slab_GrossEdgeSurface.png 

Surface Area of the Slab Top (Gross)

Area of the Surface of the Top of the Slab, including the Surface of any holes.

Reduced by trims. SEO's are ignored

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/060_elementparameters/Slab_TopwithHoles.png 

Surface Area of the Slab Top (Gross, with holes)

Area of the Surface of the Top of the Slab, reduced by the Surface of any holes.

Reduced by trims. SEO's are ignored

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/060_elementparameters/Slab_GrossTopSurface.png 

Holes Sur­face Area

Total Top Surface Area of all holes in the Slab, measured according to the Slab's 2D polygon.

SEO's are ignored

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/060_elementparameters/Slab_HolesSurface.png 

Reference Plane Loca­tion

Top or Bottom.

For a composite Slab, can also be Core Top or Core Bottom

Reference Plane location as defined in Slab Settings.

 

  • Was this Helpful ?
  • YesNo
Relevant topics