Print

The File > Print command will bring up a Print dialog box which varies slightly depending on the view you are printing: Layout, 2D or 3D.

Print 2D Document

Print 3D Document

Print Picture

Print Layout

Note: The following descriptions are based on the Windows interface.

Items to be Printed

The Print command enables you to print the entire contents of the current window, or just a particular Print Area, as set in the Print 2D Document dialog box. From the Layout Window, you can print just the Layouts which are selected in the Navigator.

Items that cannot be printed include Hotspots, selection dots, Section depth lines, Roof pivot lines, Cameras and their paths.

The lines of the Construction Grid can be optionally printed from the 2D windows by checking the Print Grid checkbox. Note that you can only print the grid if Grid Display is ON.

See Show/Hide Construction Grid.

Items on a Trace view can also be printed.

Note: Elements that are located on remote stories but individually set to display on the current story will always appear on the output.

Use the Document > Model View > Model View Options dialog box to specify the display of model items on the Floor Plan, and thereby the printed output.

Header/Footer

When printing from ARCHICAD’s 2D or 3D window or Layout window, you have the option to place a Header or Footer on the printed page. You set the content of the Header/Footer in Header/Footer Settings.

Output Color

If you are using a printer that supports color or grayscale output, the color of the printed elements is defined by:

1.The setting made in the Print dialog box. Checking the Black and White box will print all colors in black independently of any other setting.

For more information, see Print 2D Document.

2.The setting made on the Properties panel of the Drawing Settings dialog box for each individual drawing placed on the layout.

Note: In the Drawing Settings Properties panel, the Pen Set pop-up allows you to choose a pen set for the drawing; the Colors pop-up allows you to choose the colors that will be used for printing it. Since the color and grayscale pensets are not connected, it makes a difference whether you first choose the Color pen set and then choose to display the drawing in grayscale or the other way round. The two results can be entirely different as shown below.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/070_documentation/DrColorGrey.png   https://helpcenter.graphisoft.com/wp-content/uploads/archicad-25/070_documentation/DrGreyColor.png

  • Was this Helpful ?
  • YesNo
Relevant topics
Print 2D Document
This dialog box is opened with the File > Print command if a 2D window (including the 3D Document Window) is active, or from the Print ...
Print 3D Document
This dialog box appears if you issue the Print command while the 3D Window is active, using the Vectorial 3D Engine, or from the Print ...
Print Versus Plot
Both Printing and Plotting are available in ArchiCAD. In ArchiCAD 10, Printing and Plotting have been brought onto a “common platform” which resulted in the Print and Plot dialog boxes becoming similar to each other. However, there are still differences…