Define Beam/Segment Structure

Select a Beam or Beam segment.

Use the Structure panel of Beam Settings (Segment page) to define its structure properties and length (fixed or flexible).

For a selected segment: these Settings are also available in Beam Edit mode.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/EditSegmentSettingsBeam.png 

Cross Section

Click an icon to define segment cross-section.

Rectangular

Circular

Complex Profile

Building Material/Profile

Use the pop-up to choose a Building Material or Profile for the Beam or Beam segment.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/BeamProfileChoose.png 

Note: The pop-up shows only the Profiles whose “Use With” control includes Beams. Profiles are defined at Options > Element Attributes > Profile Manager.

Segment Length (Fixed or Flexible)

For each selected segment: Define its length as either fixed or flexible, by clicking the corresponding icon in the Structure panel.

For fixed-length segment: Define the length. It will remain unchanged even if the Beam stretches. (You can also enter a selected segment’s length in the Structure list.)

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/FixedSegmentBeam.png 

For a flexible segment: Define its length as a percentage of all the flexible segments. (The flexible segments together add up to 100%.) Segment length will stretch accordingly if the Beam stretches.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/FlexibleSegmentBeam.png 

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/FixedRedBeam.png 

Segment Length - Edit in 3D

1.Select the Beam in the 3D window.

2.Click the Join hotspot (on the Beam reference line).

3.From the pet palette, use Move Segment Join to adjust segment length

Note: If you drag the segment hotspot into the adjoining segment, this eliminates the dragged segment entirely.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/040_elementsvb/DragSegmentJoin.png 

Related Topics:

Tapered Column or Segment

Rotate Join Angle

Core and Veneer

Delete Column Segment or Beam Segment

  • Was this Helpful ?
  • YesNo
Relevant topics
Delete Column Segment or Beam Segment
For a multi-segment Column or Beam, delete a particular segment: Use Element Settings 1.Select the element. 2.Open Column or Beam Settings - Segment page. 3.Select a segment and click Remove.   Remove Segment Graphically 1.Select the element. 2.Click the Join hotspot (on the ...
Define Column/Segment Structure
Select a Column or Column segment. Use the Structure panel of Column Settings (Segment page) to define its structure properties and length (fixed or flexible). For a selected segment: these Settings are also available in Column Edit mode.   Cross Section Click an icon to define ...
Tapered Beam or Segment
You can created a tapered Beam, or taper any single Beam segment. Use the Segment page of Beam Settings. (For a multi-segment Beam, select the segment to taper.) 1.In the Structure panel, choose Tapered geometry. 2.Use the pop-up to define the cross-section dimensions of the tapered Beam ...