Options for Editing Ruled Shells

The Ruled Shell has two profiles. One end of the first profile is distinguished by a larger hotspot; this represents the Shell’s base height.

Here are some editing possibilities for either profile:

Continue Profile

For example, extend the straight-line profile to make that end of the Shell wider.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/040_elementsvb/ContinueProfileRuled.png     https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/040_elementsvb/ContinueProfileRuled2.png

Curve Edge

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/040_elementsvb/CurveEdgeRuled1.png     https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/040_elementsvb/CurveEdgeRuled2.png

Drag Profile

Use this command to drag the profile within its own plane, in horizontal and/or vertical directions, to a new location.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/040_elementsvb/DragProfile1.png     https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/040_elementsvb/DragProfile2.png

Rotate Profile

Use these commands to rotate the selected profile in space.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/040_elementsvb/MirrorShell1.png     https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/040_elementsvb/MirrorShell2.png

Elevate Profile Plane

Here you move the entire plane of the profile in the vertical direction.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/040_elementsvb/ElevateProfile.png     https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/040_elementsvb/ElevateProfile2.png

Drag Profile Horizontally

Here you take the profile plane and drag it horizontally.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/040_elementsvb/DragProfileHoriz1.png     https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/040_elementsvb/DragProfileHoriz2.png

Turn Profile Plane

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/040_elementsvb/TurnPlane1.png 

Click to enter the turning point. Then move your cursor to define the turn direction, and click to complete.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/040_elementsvb/TurnPlane100081.png   https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/040_elementsvb/TurnPlane2.png   https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/040_elementsvb/TurnPlane3.png

  • Was this Helpful ?
  • YesNo
Relevant topics
Ruled Shells
A Ruled Shell requires two separate profiles in any two planes. Each of the two profiles, like line-type elements, consists of segments and ...
Options for Editing Revolved Shells
Select the axis or the profile of the Revolved Shell. One end of the axis is distinguished by a larger hotspot; this represents the Shell’s ...
Options for Editing Extruded Shells
About the Extrusion Vector •One end of the extrusion vector (its initially placed point) is distinguished by a larger hotspot; this ...