Parameter |
Short Description |
Long Description |
|
Column (Segment) Core Height/Diameter |
For a rectangular or profiled Column: One of the dimensions of the Column in cross-section. (The other dimension is “Core Width”.) |
For a circular Column: the diameter of the Column.
Does not include veneer. (To include veneer, use the General “Width” field.) |
|
Core Width |
For a rectangular or profiled Column: One of the dimensions of the Column in cross-section. (The other dimension is “Core Height/Diameter”.)
|
For a circular Column: the diameter of the Column. Does not include veneer. (To include veneer, use the General “Width” field.) |
|
Slant Angle |
Same as the General “Slant Angle” parameter |
|
|
Column (Segment) Cross Section |
Rectangular, Circular or Profiled |
Defined in Column Settings |
|
Column (Segment) Ends Surface |
Surface assigned to Column Ends |
Defined in Column Settings (via Building Material, or Override in Model Panel) |
|
Column (Segment) Extrusion Surface |
Name of the Surface assigned to Column Extrusion |
Defined in Column Settings (via Building Material, or Override in Model Panel) |
|
Column (Segment) Veneer Building Material |
Name of Building Material assigned to Veneer |
Defined in Column Settings |
|
Column (Segment) Veneer Surface area |
Net Surface area of the Column Veneer on all sides |
Surfaces of the Veneer top/bottom are ignored. Reduced by Solid Element Operations. |
|
Column (Segment) Veneer Type |
Core, Finish or None |
Defined in Column Settings This setting affects the display of the Column, depending on Partial Structure Display Settings. |
|
Gross Surface Area of the Column (Segment) Core (without top/bottom) |
Gross Surface Area of the Column Core on all sides. |
Surfaces of the Column top/bottom are ignored. Solid Element Operations are ignored. |
|
Gross Surface Area of the Column (Segment) Core top (or bottom) |
Surface area of the cross-section of the Core at the top (or bottom) of the Column. |
Does not take any Solid Element Operations into account. |
|
Gross Surface Area of the Column (Segment) Veneer (without top/bottom) |
Gross Surface Area of the Column Veneer on all sides |
Surfaces of the Veneer top/bottom are ignored. Solid Element Operations are ignored. |
|
Gross Surface Area of the Veneer top (or bottom) |
Surface area of the cross section of the Veneer at the top (or bottom) of the Column. |
Does not take any Solid Element Operations into account. |
|
Perimeter of Column Profile (bottom) |
Perimeter of the profile at the bottom of the Column (or segment). |
Profile plane is perpendicular to the Column axis. |
|
Area of the Column (obsolete) |
Column’s cross section area projected perpendicularly to the Floor Plan. Includes the area of the Veneer, if any. |
Obsolete. Use General Area parameter. |
|
Gross Volume of the Column (Segment) Core |
Gross Volume of the Column Core. |
Solid Element Operations are ignored. |
|
Gross Volume of the Column (Segment) Veneer |
Gross Volume of the Column Veneer. |
Solid Element Operations are ignored. |
|
Maximum Height of the Column |
For a Column cut e.g. by a slanted Roof: the highest point of the Column. |
|
|
Minimum Height of the Column |
For a Column cut e.g. by a slanted Roof: the lowest point of the Column. |
For a straight or slanted Column: equivalent to Height (General field). |
|
Net Surface Area of the Column (Segment) Core (without top/bottom) |
Net Surface area of the Column Core on all sides (but not the top or bottom) |
Surfaces of the Column top/bottom are ignored. Reduced by Solid Element Operations. |
|
Net Surface Area of the Column (Segment) Core bottom |
Surface area of the cross-section of the Core at the bottom of the Column. |
Reduced by Solid Element Operations. |
|
Net Surface Area of the Column (Segment) Core top |
Surface area of the cross-section of the Core at the top of the Column. |
Reduced by Solid Element Operations. |
|
Net Surface Area of the Veneer bottom |
Surface area of the cross-section of the Veneer at the bottom of the Column. |
Reduced by Solid Element Operations. |
|
Net Surface Area of the Veneer top |
Surface area of the cross-section of the Veneer at the top of the Column. |
Reduced by Solid Element Operations. |
|
Net Volume of the Column (Segment) Core |
Net Volume of the Column Core. |
Reduced by Solid Element Operations. |
|
Net Volume of the Column (Segment) Veneer |
Net Volume of the Column Veneer on all sides. |
Reduced by Solid Element Operations. |
|
Column (Segment) Listing Parameters
Parameter
Short Description
Long Description
Core Height / Diameter
For a rectangular or profiled Column Segment: One of the dimensions of the Segment in cross-section. (The other dimension is "Core Width".)
Does not include ...
For a multi-segment Column or Beam, delete a particular segment:
Use Element Settings
1.Select the element.
2.Open Column or Beam Settings - Segment page.
3.Select a segment and click Remove.
Remove Segment Graphically
1.Select the element.
2.Click the Join hotspot (on the ...
Parameter
Short Description
Long Description
Bottom Surface
Name of the Surface assigned to the bottom of the Beam Segment.
Defined in Beam Settings (via Building Material, or Override in Model Panel)
Bottom Surface ...