Column Listing Parameters

Parameter

Short Description

Long Description

 

Column Cross Sec­tion

Rectangular, Circu­lar or Profiled.

Defined in Column Settings

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_CrossSection.png 

Core Height / Diameter

For a rectangular or profiled Column: One of the dimen­sions of the Column in cross-section. (The other dimen­sion is "Core Width".)

 

Does not include veneer. (To include veneer, use the General "Width" parameter.)

For a circular Column: the diameter of the Column.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_CoreSize.png 

Core Width

For a rectangular or profiled Column: One of the two dimensions of the Column in cross-section. (The other dimension is "Core Height / Diameter".)

 

Does not include Veneer. (To include veneer, use the General "Width" parameter.)

For a circular Column: the diameter of the Column.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_Core2ndSize.png 

End Surface

Surface assigned to Column Ends.

Defined in Column Settings (via Building Material, or Override in Model Panel)

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_Material.png 

Extrusion Surface

Surface assigned to Column Extrusion.

Defined in Column Settings (via Building Material, or Override in Model Panel)

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_Material00203.png 

Gross Sur­face Area of the Core (without Top/Bot­tom)

Gross Surface Area of the Column Core on all sides.

Surfaces of the Column top/bottom are ignored.

Solid Element Operations are ignored.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_GrossCoreSurface.png 

Gross Sur­face Area of the Core Bottom

Surface area of the cross-section of the Core at the bottom of the Column.

Does not take any Solid Element Opera­tions into account.

 

Gross Sur­face Area of the Core Top

Surface area of the cross-section of the Core at the top of the Column.

Does not take any Solid Element Opera­tions into account.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_GrossCoreTopSurface.png 

Gross Sur­face Area of the Veneer (without Top/Bot­tom)

Gross Surface Area of the Column Veneer on all sides.

Surfaces of the Veneer top/bottom are ignored.

Solid Element Operations are ignored.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_GrossVeneerSurface.png 

Gross Sur­face Area of the Veneer Bottom

Surface area of the cross section of the Veneer at the bot­tom of the Column.

Does not take any Solid Element Opera­tions into account.

 

Gross Sur­face Area of the Veneer Top

Surface area of the cross section of the Veneer at the top of the Column.

Does not take any Solid Element Opera­tions into account.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_GrossVeneerTopSurface.png 

Gross Vol­ume of the Core

Gross Volume of the Column Core.

Solid Element Operations are ignored.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_GrossCoreVolume.png 

Gross Vol­ume of the Veneer

Gross Volume of the Column Veneer.

Solid Element Operations are ignored.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_GrossVeneerVolume.png 

Maximum Height of the Column

For a Column cut e.g. by a slanted Roof: the highest point of the Column.

For a straight or slanted Column: equiva­lent to Height (General field).

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_MaximumHeight.png 

Minimum Height of the Column

For a Column cut e.g. by a slanted Roof: the lowest point of the Column.

 

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_MinimumHeight.png 

Net Surface Area of the Core (with­out Top/Bot­tom)

Net Surface area of the Column Core on all sides (but not the top or bottom).

Surfaces of the Column top/bottom are ignored.

Reduced by Solid Element Operations.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_NetCoreSurface.png 

Net Surface Area of the Core Bot­tom

Surface area of the cross-section of the Core at the bottom of the Column.

Reduced by Solid Element Operations.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_NetCoreBottomSurface.png 

Net Surface Area of the Core Top

Surface area of the cross-section of the Veneer at the top of the Column.

Reduced by Solid Element Operations.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_NetCoreTopSurface.png 

Net Surface Area of the Veneer Bot­tom

Surface area of the cross-section of the Veneer at the bot­tom of the Column.

Reduced by Solid Element Operations.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_NetVeneerBottomSurface.png 

Net Surface Area of the Veneer Top

Surface area of the cross-section of the Veneer at the top of the Column.

Reduced by Solid Element Operations.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_NetVeneerTopSurface.png 

Net Volume of the Core

Net Volume of the Column Core.

Reduced by Solid Element Operations.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_NetCoreVolume.png 

Net Volume of the Veneer

Net Volume of the Column Veneer on all sides.

Reduced by Solid Element Operations.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_NetVeneerVolume.png 

Perimeter of Column Profile (Bot­tom)

Perimeter of the Column profile at the bottom of the Column.

Profile plane is perpendicular to the Col­umn axis.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_Perimeter.png 

Perimeter of Column Profile (Top)

Perimeter of the Column profile at the top of the Col­umn.

Profile plane is perpendicular to the Col­umn axis.

 

Veneer Building Material

Name of Building Material assigned to Veneer

Defined in Column Settings

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_VeneerFill.png 

Veneer Sur­face Area

Net Surface area of the Column Veneer on all sides

Surfaces of the Veneer top/bottom are ignored.

Reduced by Solid Element Operations.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_NetVeneerSurface.png 

Veneer Type

Core, Finish or None

Defined in Column Settings

This setting affects the display of the Col­umn, depending on Partial Structure Dis­play Settings.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-24-reference-guide/060_elementparameters/Column_VeneerType.png 

  • Was this Helpful ?
  • YesNo
Relevant topics
Column (Segment) Listing Parameters
Parameter Short Description Long Description   Column (Segment) Core Height/Diameter For a rectangular or profiled Column: One of the dimensions of the Column in cross-section. (The other dimension is “Core Width”.) For a ...
Column Segment Listing Parameters
Parameter Short Description Long Description Core Height / Diameter For a rectangular or pro­filed Column Segment: One of the dimensions of the Segment in cross-sec­tion. (The other dimension is "Core Width".) Does not include ...