The Openings tab page of the Model Review dialog box lists data for all of the Openings on the building shell and on internal thermal block boundaries.
To change the physical properties of the selected Openings List item, either edit the values manually, or use the predefined value sets from ...
•For construction elements (Wall / Slab/ Beam/ Column / Roof / Shell / Morph / Mesh): Cut fills are assigned via the Building Material attribute. The construction element will use the cut fill defined for the assigned Building Material.
See Building Materials.
•For GDL-based ...
Relevant for Wall, Slab, Roof, Shell, Morph, Mesh, Beam, Column.
Cut Surfaces
Set the attributes displayed for cut surfaces both in Section and on the Floor Plan.
•For a basic element:
◦Define the cut line and pen
•For a basic, composite or complex profile ...
Relevant for Wall, Beam, Column, Roof, Shell, Morph.
The Show Projection pop-up provides options for setting the range within which an element should be displayed.
This control is only available if the element’s Floor Plan Display is set to either “Projected” or ...
Relevant for Wall, Beam, Column, Roof, Shell, Morph.
Use the Floor Plan Display pop-up from the Floor Plan & Section panel of the element’s Tool Settings dialog box.
Options vary depending on the element.
Projected with Overhead
Shows cut part of element’s ...
Relevant for Wall, Slab, Roof, Shell, Morph, Mesh, Beam, Column.
Use the Show on Stories pop-up in the Floor Plan and Section Panel of Tool Settings to control the display of construction elements by story.
The available options differ by element.
All Relevant Stories
The element ...
The Openings tab page of the Model Review dialog box lists data for all of the Openings on the building shell and on internal thermal block boundaries.
To change the physical properties of the selected Openings List item, either edit the values manually, or use the predefined value sets from ...