Adding Insulation to Walls: Renovation Workflow

If you want to add a layer of insulation to an existing wall, you simply add an insulation skin to the composite wall. However, you cannot assign “New” status to just a single component of a wall - only to the wall itself.

To distinguish (for Renovation Filter purposes) the new insulation added to the original wall, the following workflow is recommended:

Existing Plan View

1.In the Renovation Palette, assign the original wall (Wall 1) a status of “Existing”.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/050_viewsvb/Insulation1.png 

New Construction View

In this view, you want to show both the Existing and the New components of the wall.

2.Alongside Wall 1, place another wall (Wall 2) alongside it to represent insulation. Define Wall 2 as “New”.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/050_viewsvb/Insulation2.png 

This way, only the new part of the Wall - the insulation part - is displayed as “New” in this view.

Planned Status View

3.Here, both Wall 1 and Wall 2 are shown with their own original attributes.

https://helpcenter.graphisoft.com/wp-content/uploads/archicad-23-reference-guide/050_viewsvb/Insulation3.png 

Note: Door and Window openings must be added to each separate Wall layer that is modeled in this workflow.

  • Was this Helpful ?
  • YesNo
Relevant topics
Adding Element Nodes
You can add new nodes to elements using the pet palette. Adding a node to a straight linear element creates an additional element. Adding a ...