Automatic Trim: Example 2

Suppose you have the following Shells and Walls:

//helpcenter.graphisoft.com/wp-content/uploads/ac22_help/040-elementsvb/RoofShell1.png 

1.Select all the elements shown (Roof, Shell, Walls).

2.From the context menu, go to Connect and choose Trim Elements to Roof/Shell.

//helpcenter.graphisoft.com/wp-content/uploads/ac22_help/040-elementsvb/RoofShell2.png 

3.In the appearing dialog box, click Trim.

//helpcenter.graphisoft.com/wp-content/uploads/ac22_help/040-elementsvb/TrimElements00045.png 

4.View the result in 3D:

//helpcenter.graphisoft.com/wp-content/uploads/ac22_help/040-elementsvb/RoofShell3.png 

For another example of an automatic trim, see Cross-Gable Roof.

  • Was this Helpful ?
  • YesNo
Relevant topics
Automatic Trim: Example 1
Suppose we have the two intersecting Shells shown here and wish to trim them to each other.   Before you start, you can turn on the ...
Trim Elements to Roof: Manual Trim
Use the manual Trim workflow if you want to trim one or more model elements to a specific Roof or Shell while deciding which parts (e.g. inside or ...