Parameter |
Short Description |
Long Description |
|
Bottom Surface |
Name of the Surface assigned to the Bottom Surface of the Slab. |
Defined in Slab Settings |
|
Bottom Surface Area |
Area of the Surface of the Slab Bottom |
Reduced by any trims, SEO’s or holes. |
|
Conditional Surface Area of the Bottom |
Surface Area of the Bottom of the Slab - this Area may be conditioned on a defined Calculation Rule. |
Condition: Subtracts the Area of holes only if they exceed a given size, as defined in Options > Project Preferences > Calculation Units & Rules (“Reduce Slab Surface by…”) Reduced by trims and SEO’s. |
|
Conditional Surface Area of the Top |
Surface Area of the Top of the Slab - this Area may be conditioned on a defined Calculation Rule. |
Condition: Subtracts the Area of holes only if they exceed a given size, as defined in Options > Project Preferences > Calculation Units & Rules (“Reduce Slab Surface by…”) Reduced by trims and SEO’s. |
|
Edge Surface |
Name of Surface assigned to Slab edges. |
Lists the Slab’s default edge surface (as defined in its Building Material). Not listed for composite Slabs. To list all Surfaces, including custom ones and those of composite elements, use a Surface-type list (e.g. All Finishes).
|
|
Edge Surface Area |
Area of the Surface of the edge of the Slab |
Reduced by trims and SEO’s. |
|
Top Surface |
Name of Surface assigned to the Top Surface of the Slab. |
|
|
Elevation Bottom |
Elevation of the Bottom of the Slab |
|
|
Elevation Top |
Elevation of the Top of the Slab |
|
|
Gross Surface Area of the Slab Bottom |
Area of the Surface of the Bottom of the Slab, including the Surface of any holes. |
Reduced by trims. SEO’s are ignored |
|
Gross Surface Area of the Slab Bottom with holes |
Area of the Surface of the Bottom of the Slab, subtracting the Surface of any holes. |
Reduced by trims. SEO’s are ignored |
|
Gross Surface Area of the Slab edges |
Area of the Surface of all the Slab edges. Hole edges are ignored. |
Reduced by trims. SEO’s are ignored |
|
Gross Surface Area of the Slab edges with holes |
Area of the Surface of all the Slab edges, including the edges of any holes. |
Reduced by trims. SEO’s are ignored |
|
Gross Surface Area of the Slab Top |
Area of the Surface of the Top of the Slab, including the Surface of any holes. |
Reduced by trims. SEO’s are ignored |
|
Gross Surface Area of the Slab Top with holes |
Area of the Surface of the Top of the Slab, reduced by the Surface of any holes. |
Reduced by trims. SEO’s are ignored |
|
Gross Volume of the Slab, minus the Holes |
Volume of the Slab, subtracting the Volume of any holes. Volume is reduced by any trims, but does not take SEO’s into account |
Reduced by trims. SEO’s are ignored |
|
Holes Surface Area |
Total Top Surface Area of all holes in the Slab, measured according to the Slab’s 2D polygon. |
SEO’s are ignored |
|
Reference Plane Location |
Top or Bottom. For a composite Slab, can also be Core Top or Core Bottom |
Reference Plane location as defined in Slab Settings. |
|
Top Surface Area |
Area of the Surface of the Top of the Slab. |
Reduced by any trims, SEO’s or holes. |
|
Slab Listing Parameters
Use these parameters in the Component lists of the Interactive Element Schedule.
COMPONENT FIELD
DESCRIPTION
...
Parameter
Short Description
Long Description
3D Length
Length of construction element, as ...
Parameter
Short Description
Long Description
Lamp Color Blue
Blue component ...