Elevations

ARCHICAD has a separate tool for creating Elevation viewpoints and linked or unlinked Elevation markers.

In contrast to Sections:

Elevations generally do not “slice through” the structure, but rather create a cross-section view of the structure from a distant point.

There is no “zero depth” option for the Elevation’s horizontal range.

Elevation markers are conventionally different from Section markers; consequently, the Marker options in Elevation Settings vary from their counterparts in Section Settings.

Unlike the Section Line, the Elevation line is an on-screen-only Marker item, and is not shown on the Layout.

See Display of Marker Range Lines.

In all other respects, the Elevation Tool works the same way as the Section Tool.

To create an Elevation viewpoint, you must place a source-type Elevation marker on the Floor Plan.

The resulting Elevation viewpoint has a Status (Model or Drawing) which determines its update process.

The Elevation Settings Model Display Panel defines the display of the Elevation viewpoint, while the Marker and Marker Head panels determine the content and display of the Elevation marker.

A linked-type Elevation marker, containing reference information only (without creating a viewpoint), can be placed in the Floor Plan, Section, Elevation, Interior Elevation, 3D Document, Detail or Worksheet Window.

Unlinked Elevation markers can also be placed.

For more information, see the following topics:

Create a Section Viewpoint

Horizontal/Vertical Range of Section Viewpoint

Assign Section Rebuild Status

Model Display in the Section Window

Define Marker Reference for Source Marker

Place a Linked Section Marker

Place Unlinked Marker

Create an Independent Section Viewpoint

Updating Sections

Floor Plan Display of Section Markers

Editing Section/Elevation/IE Lines on Floor Plan

Section and Elevation Settings

Moving an Elevation Marker

This option is available only for Elevation and Interior Elevation markers.

//helpcenter.graphisoft.com/wp-content/uploads/ac22_help/050-viewsvb/MoveElevation.png 

Select the Elevation line; the marker will be selected and will display a node.

Click on this node and choose the Move Elevation Marker command from the pet palette, then drag the marker to the desired position.

The marker will retain this position even if the elevation is dragged or rotated to a new position.

  • Was this Helpful ?
  • YesNo
Relevant topics
About Interior Elevations
  Interior Elevations (IEs) work similarly to Sections and regular Elevations: choose an input method; define the view and its limits; and ...
Interior Elevations (IE)
This dedicated ARCHICAD tool is optimized for creating interior elevations of interior spaces. Topics in this section: About Interior ...