During the course of your Renovation project, you may wish certain specific elements to be visible only if a particular Renovation Filter is in effect.
To achieve this, you must define the selected element(s) as specific to the current Renovation Filter. The filter-specific element(s) will be shown only in that single Renovation Filter, and will not exist in any other Renovation Filter.
Note: Of course, the filter-specific element will be shown in that Renovation Filter only if its Renovation Status would ordinarily be shown in that Renovation Filter.
You can define a selected element as “filter-specific” either on the Renovation Palette, or in its Selection Settings (Categories and Properties Panel).