Fills

Subtopics

04_Documentation.09.003.1

About Fills

Fills are geometric 2D hatching patterns that help you distinguish and decorate the elements of your project As ...
04_Documentation.09.006.1

Fill Categories

Fill Categories are used to group fills according to their function in the project: Cut Fill (two types), Cover Fill, Drafting ...
04_Documentation.09.008.1

Assign a Cover Fill

In ARCHICAD, cover fills can be applied to Slabs, Meshes, Roofs, Shells, Morphs and Zones. Slabs, Meshes, Roofs, Shells and ...
04_Documentation.09.009.1

Draw a Drafting Fill

To draw a Drafting fill, first activate the Fill tool in the Toolbox and choose one of the three Geometry Methods from the Info ...
04_Documentation.09.010.1

Add Area Text to a Fill

Enable the Show Area Text checkbox in the General Settings panel of Fill Settings. When you create the Fill, the Hammer cursor ...
04_Documentation.09.012.1

Display of Vectorial Fill

Vectorial Fills use a hatching pattern, and can be used to represent the cut surfaces or top covers (cover fills) of construction ...
04_Documentation.09.018.1

Using Gradient Fills

Gradient Fills are Drafting fills only, and thus are available only from the Fill Tool’s pop-up. (Drafting fills are drawn ...