This article teaches you how to model the terrain based on the contours of a 2D linework drawing using the Mesh tool. 1. Create a mesh using the Mesh Tool...
For a description of generic settings common to all tools in the Toolbox, see Working in Tool Settings Dialog Boxes.
For general information on how to create and edit roofs, see Roofs.
For information on the Structural Analytical Parameters Panel of Roof Tool Settings:
See 2D Members ...
For a description of generic settings common to all tools in the Toolbox, see Working in Tool Settings Dialog Boxes.
For general information on how to create and edit roofs, see Roofs.
Roof Geometry and Positioning Panel
Pivot Offset: Enter a value here for the offset of the pivot ...
To adjust other elements to a single-plane roof, you can use the crop function, described in the following sections:
Using the Crop to Single-plane Roof Function
Undo Roof Crop
Effect of Roof Crop on Wall/Column Height Settings
Use Roof Crop to Create Complex-Shaped Walls, Beams and ...
To create a Mansard Roof, you want a Multi-plane Roof that has two different levels to accommodate two different pitches.
1.Begin with a regular Hip Roof.
2.Select the Roof.
3.In the Multi-plane Geometry panel of Roof Settings, click Add to add a new Roof level.
...
You can customize the surface and/or angle of any edge of a Roof, or the edge of a hole in a Roof. Once you set the customized surface/angle options, you can choose to apply them to the clicked edge only, to all edges of the clicked polygon (hole), or to all roof edges.
1.Select the Roof.
...
RoofMaker allows you to add GDL Object-based elements to specific parts of your design in order to enhance them in 3D views and Section/Elevation/IE windows. RoofMaker can be accessed from the Design > Roof Extras menu. Technically, RoofMaker is an ARCHICAD Add-On and is loaded with ...
Parameter
Short Description
Long Description
Roof Geometry Method
Single Plane, Multi-plane
Roof Geometry method
Bottom Surface
Name of Surface assigned to the Roof bottom.
Assign ...