Search results for: roof


https://helpcenter.graphisoft.com/wp-content/uploads/ac22_help/040-elementsvb/Gablet5-150x121.png

Gablet Roof

  1.Begin with a regular hip roof.   To see how to make a hip roof, see Hip Roof. 2.Make this roof into a two-level roof: open ...

Add Roof Level

You may wish to add additional levels to your Multi-plane Roof: for example, in creating a mansard roof, you want two roof levels, each with a different pitch. 1.Select the Roof. 2.In the Multi-plane Geometry panel of Roof Settings, or from the Info Box, click Add to add a new Roof ...
https://helpcenter.graphisoft.com/wp-content/uploads/ac22_help/040-elementsvb/ContourEdge-150x150.png

Customize Edge of Roof or Roof Hole

You can customize the surface and/or angle of any edge of a Roof, or the edge of a hole in a Roof. Once you set the customized surface/angle ...

Create Roof Level Lines

Use this command (Design > Roof Extras > Create Roof Level Lines) to place a Line on a selected Roof at the height value you specify. After you place the Roof Level Line, you can place a Level Dimension there to indicate the elevation. Note: Roof Level Lines can be placed on ...

Create a Multi-plane Roof

On the Floor Plan or 3D Window: 1.Select the Roof Tool.   2.In Roof Settings or the Info Box, adjust the main roof parameters (e.g. pitch, surfaces, eaves overhang). 3.Choose the Multi-plane method from the Info Box or from Roof Settings. 4.Choose one of the construction Methods ...
https://helpcenter.graphisoft.com/wp-content/uploads/ac22_help/040-elementsvb/MultilevelRoof3D-150x150.png

Gambrel Roof

The Gambrel Roof is like the Mansard, except that it is gabled at both ends.   1.Begin with a Gable Roof.   2.Select the Roof. ...

Modify the Roof Pitch

For a Single-plane Roof: Once you’ve drawn a roof and selected it, you can modify its pitch in any one of the following ways: •Change the roof pitch in the Info Box or in Roof Settings. •In the 3D window, select the roof, click on any point that is not on the pivot line, ...

Create a Hole in a Roof

There are two ways to create a hole in a Roof. Method 1 1.Select the Roof in the Floor Plan or the 3D window. 2.From the contour polygon (not the pivot polygon!), bring up the pet palette and choose the Subtract from Polygon command.   3.Draw the hole in the Roof. 4.View the ...
https://helpcenter.graphisoft.com/wp-content/uploads/ac22_help/040-elementsvb/RoofInfoBoxMulti-150x64.png

Create a Multi-plane Roof

On the Floor Plan or 3D Window: 1.Select the Roof Tool. In Roof Settings or the Info Box, adjust the main roof parameters (e.g. pitch, surfaces, ...
https://helpcenter.graphisoft.com/wp-content/uploads/ac22_help/040-elementsvb/MultiplaneExamples-150x150.png

Examples of Multi-plane Roofs

The following sections show you how to create the following roof types, step by step: Hip Roof Complex Roof Gable Roof Pyramidal Roof ...